Introduces the latest technology in gel perfection; Intense Seal: 100% UV Dry. The only no-cleanse sealer, on the market, that provides a protective seal while eliminating buffing and yielding a mirror glass finish. Used on gels, acrylics and wraps, maintaining artificial nails is no longer arduous. This buffer-in-a-bottle seals the cuticle and creates a smooth surface, while preventing solvent attack, as well as, polish stains. That means no more yellow Frenchs; the built in U.V. Blockers keep nails gorgeous and lily white.
Intense Seal allows you to save precious minutes with a one-step, preventative lifting seal. No cleansing, no buffing; just brush, cure, and go! IBD Introduces the Ultimate time saver for nail technicians.
UV light: Portable, light weight gel curing light
Keywords: ibd 5 second intense seal with uv light kit
The deluxe two-handed lamp combines UV light, heat and fan for the most intensive drying power. Dries any air, heat or UV topcoats. Advanced Reflector System generates more UV output than lamps with higher wattage and cures evenly around the entire nail. Features include a built-in timer and hinged top with adjustable height for manicures and pedicures. UL and CE approved.
Advanced UV Technology Evn Heat Distribution Ergonomic Design 7 Easy to Use Controls Cures UV Products Quickly & Evenly Adjustable Lamp Height for Pedicures Dries Plosh Fast
Uv, Heat & Fan ( Spa sensation and dries nails faster) Advanced Reflector system (Generates more UV output than lamp with higher wattage and cures evenl around the entire nail) Hinged Top(Easy to clean and replace bulbs or reflector) Adjustable height(Perfect for pedicures as well as manicures) Ergonomic Design (Top of lamp can be used as an armrest) UL and CE Approved Safe for your salon
UV Replacement Bulbs Ensure your Jet Lamp is working at its fullest potential.
Unlike regular bulbs, UV bulbs do not suddenly burn out. UV Bulbs gradually weaken in intensity and lose their power to cure. To maintain the most efficient cure, we recommend that you replace bulbs after 3000 hours of use or every 6-12 months.
Before replacing any bulb or reflector be sure to turn your lamp off, unplug unit and lift hinged top to the open position.
1. Grasp the front UV bulb between fingers and rotate bulb 90 degrees. or until prongs loosen.
2. Lower one end of the UV bulb and remove it from the unit
3. Repeat procedure using the back UV bulb.
4. Insert new UV bulb by aligning the prongs vertically to the notches in one of the side UV bulbs sockets. Firmly insert into the socket.
5. Push the UV bulb prongs up into the other rear socket.
6. Rotate the UV bulb 90 degrees, until it clicks into place.
7. Repeat the procedure with the front UV bulb.
a key element to cuing thoroughly and drying efficiently is the advanced parabolic system. To maintain superior results and to sanitize for clean environment, change your bottom and side refectors at the same time your bulbs are replaced and anytime you discover moderate amounts of product residue on the reflectors.
Ensure your Jet Lamp is working at its fullest potential
Contents: 4 each 9 watt Bulbs
For Professional Use
Unlike regular UV bulbs, do not suddenly burn out. UV bulbs gradually weaken in intensity and lose their power to cure. To maintain the most efficient cure, we recommend that you replace bulbs after 3,000 hours of use or every 6-12 months.
Directions: Before replacing any bulb or reflector tray be sure to turn your lamp off and unplug it.
1. Turn lamp off and unplug. 2. Remove tray 3. Grapp the front UV bulb between fingers and gently pull until bulb releases. 4. Repeat process for all bulbs. 5. Insert the new bulbs. 6. Replace tray.
Reflector Tray Replacements: A key element to curing thoroughly and drying efficiently is the advanced parabolic system. To maintain superior results and to sanitize for a clean environment, change your replacement tray at the same time your bulbs are replaced and anytime you discover moderate amounts of product residue on the reflector tray.