Order online or over the phone

call us at 1-888-520-6689 weekdays

8:30am - 5:00pm central time zone

TOLL FREE1-888-520-6689

Andis CERAMIC BGRC Pro Detachable Blade Clipper - # 63965

$ 133.99

Andis CERAMIC BGRC Pro Detachable Blade Clipper - # 63965

$ 133.99

Andis Ceramic BGRc Professional Detachable Blade Clipper

20% lighter, 10% smaller

Powerful, rotary motor clipper with detachable blades for heavy-duty use

Includes CeramicEdge #1 and #000 Blades

Works with all Andis UltraEdge and CeramicEdge blades (sold separately)

Also compatible with Oster 76 Blades

Detachable blade clipper for easy changing, cleaning and style versatility

Convery to a cordless clipper by using BGR+ battery pack and SensaCharge ( sold separately)

Andis experts recommend starting your blade collection with these six esssential CeramicEdge blades. (#1 and #000 included)

Congratulations! You just went first class when you bought this Andis appliance. Careful workmanship and quality design have been hallmarks of Andis products since 1922.

Keywords: andis ceramic bgrc pro detachable blade clipper

Please read the following instructions before using your new Andis clipper. Give it the care that a fine precision built instrument deserves and it will give you years of service. Before starting your clipper, remove the balde guard (some models may not have a blade guard). Plug cord into electrical outlet, operate 120 volts, 60 cycle AC electrical current or as noted on unit. To start clipper, move switch button to on position; to stop, move switch button back to original position. After using your Andis Clipper, rewrap cord and store in a safe place.


To remove blade set, first make sure you clipper motor is switched off, then push down on balde with both thumbs (Diagram A) and slide blade off blade hinge. If your blade hinge should snap closed and is flush with the cliper, use a small standard screwdriver to pry the tongue of the hinge out (Diagram B). NOTE: Hair may accumulate in the front cavity of the housing under the blade. If this happens, you can clean out the hair by brushing out the cavity with a small brush or an old toothbrush while the blade is off the clipper (see Diagram B for location of cavity being referenced).


To replace or change your blade set, slide the blade breacket onto the hinge of the clipper (Diagram C) and with the clipper turned on, push position.


The internal mechanism of your motor clipper has been permanently lubricated in this manual, no other maintenance should be performed, except by Andis company or an Andis Authorized repair service station.


Blades shold be oiled before, during, and after use. If your clipper blades leave streaks or slow down, it's sure sign blades need oil. Pleace a few drop of Andis clipper oil on teh front and side of the cutter blades (Diagram D). Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficients oil for good lubrication, but is an excellent clipper blade coolant. Always replace broken or nicked blades to prevent injury. You can clean teh excess hair from your blades by using a small brush or worn out toothbrush. To clean the blades, we suggest to immerse the blades only into a shallow pan of andis clipper oil, while the clipper is running, Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper off and dry blades with a clean dry cloth and start clipping again. If upon cleaning your blades you find that the blades will still not cut, there may be a few fine pieces of hair trapped between the upper and lower blade. If this happens, you will need to snap the blade off the clippers.